Hi,

I want to use models of SAPAPPLH at ESH_COCKPIT. However, it returns no value. How can I access to those models?

Best regards,

ts

Hi Guys

Does any of you have experience if TWS does work with Netweaver 7.40 ?

We are upgrading from BW/NW 7.01 to BW/NW 7.40 and are using TWS 8.6 FP2.

Anyone who has upgraded to BW 7.40 and are using TWS (8.6), that can tell if this interface still works after going to BW 7.40 or if actions, like SW updates, must be planned?

(TWS is only connected to production system and we have no possibility to test the interface between TWS and BW/NW until after the production upgrade)

Br

Tom Bo

Dear All,

We are facing severe issue of breaks from outside , but once we are checking public ip, there is no break in public , I had raised OSS ticket also but they told there is problem in network , Our network team is not accepting as there is no ping break from out side , please give me some command or expertise to resolve the issue.

Regards

RK

Hi All,

I am facing issue while installing Enterprise Service Repository  on Netweaver Composit Environment it is saying that The dbmcli call for action GET_DB_STATE failed. solution: check log file XCMDOUT.LOG. below is the content of log file.

    Subprocess starts at 20140903015940

    Execute Command : /sapdb/programs/bin/dbmcli -n hostname -d DM2 -u control,******** db_state

    Start subprocess as user with uid: root

    Subprocess stops at 20140903015941

    OK

    State

    ONLINE

can any one please help on this Appreciate your help!

Thanks,

Narendar.

Dear Experts,

Background job SAP_COLLECTOR_FOR_PERFMONITOR getting failed  with abap dump LOAD_PROGRAM_NOT_FOUND.

As it is hourly scheduled job and it gets finished 22 times in a day but other 2 times fails with abap dump.

Finished Job log

Job started

Step 001 started (program RSCOLL00, variant , user ID Bharath)

Clean_Plan:Cleanup of DB13 Plannings

Clean_Plan:started by RSDBPREV                       on server

Clean_Plan:Cleaning up jobs of system DEV

Clean_Plan:finished

Job finished

Failed Job Log

Job started

Step 001 started (program RSCOLL00, variant , user ID Bharath)

Internal session terminated with a runtime error (see ST22).

Kindly suggest on this..

Thanks,

Bharath.

Hello,

We have a requirement to use only internet explorer for SAP portal.

When we try to use portal in any other browser, it should display a message saying "This browser is not supported for the application" (or any other message). But purpose is, the portal application should be usable in only one browser i.e Internet Explorer.

If any one have any idea on this, how this can be implemented, then please share the same. I tried to find if there are any standard SAP portal parameters, but haven't come across any.

Regards,

Denish

During import ABAP step, an error occured. "Program migration monitor exits with error code 103 ". I am attaching the log files and the screenshot.

Dear All,

I am in the process of configuring DMS in MM. I would like to create documents by transaction CV01N and assign the same to MM activities.

Can anyone help me in this regard by sending a DMS Configuration steps .

My email is sree_kala4u@yahoo.com

Request for an early reply.

Warm regards.

Kala

Dear All,

I am currently installing my Quality Server EHP 6.0 /ECC 6.0 with Sybase Database

SAPINST is asking for a  Kernel DVD, i am giving it  but it does not accept it.

It says:

"Found the label SAP:AKK:720:UKERNAL:SAP Unicode Kernal 7.20:WINDOWS_X86_64:CD51030xxx but need label LIVECACHE:LCA10:LC79:WINDOWS_X86_64"

which dvd its asking for

Which DVD do I need to proceed with the Installation?

Thanks in advance.

Please find the attached screen short..

kind regards

Sanjiv Kumar

We're facing a strange behaviour in ST02 after a system copy using MaxDB backup/restore with SWPM (backup was from our production system). When we click on history, no data is shown:

We have to click on "-> Server", then the data is shown:

Does anyone know how to make history work?

Hello,

I have made a upgrading of BASIS and ABAP Support Package Level to 6.20 69.

I recreated the total stms with DEV as domain controller as initially. Transport for all landscape are working fine but when I go to stms_import and refresh import queue it asks the user ID and password of each Server (DEV, QA, PRD).

It happens every time on transport (asking password).

I appreciate any help our tip.

Thanks,

Marcos Facina

Dear Experts,

I have a requirement to get the information about the maximum & least number of users logged on to the system in the past month along with the date.

I have checked RZ20 --> CCMS monitoring template but it gives only present day count.

Kindly suggest on this.

Regards,

Bharath.

Hi All,

Need some help in understanding the session cookies in the SAP NW AS Java. I am using SAP NetWeaver Application Server 7.20 / AS Java 7.30

I have a web page that makes concurrent requests to the NW server using jQuery-Ajax every 30seconds.

I am seeing the JSESSIONMARKID is getting updated very often(mostly every 30secs-1 min but not consistently)and the JSESSIONID gets updated every 1-2 mins but this is particular pattern.

My doubt is does the JSESSIONID gets updated every 1 or 2 mins? My assumption was that once JSESSIONID is issued it remains same and the server keeps track when was the last user activity and based on inactivity for configured period of time the session gets timed out and if user comes back after session out with a JSESSIONID, he will be redirected to login page.

Kindly help me in understanding the JSESSIONID and JSESSIONMARKID cookie update process.

Thanks in advance for your valuable reply.

Regards,

Praveen

Dear all,

since today morning I am having troubles with the SAP Netweaver ABAP Trial version which has run now for over 6 months without any issues. The issues appeared suddenly and I didn't change anything to configuration / network. I am going through the forum now since a couple of hours and I have checked the following. I have read that the most common error is, that the log is full. Anyhow I have checked the log files.

1.) Logfiles: I can't see anything in the log file saying that something is wrong. Please find enclosed the log files DEV_DISP, DEV_W0 and DEV_MS:

DEV_DISP:

---------------------------------------------------

trc file: "dev_disp", trc level: 1, release: "720"

---------------------------------------------------

sysno      00

sid        NSP

systemid   562 (PC with Windows NT)

relno      7200

patchlevel 0

patchno    201

intno      20020600

make       multithreaded, Unicode, 64 bit, optimized

profile    \\mwsrvsap\sapmnt\NSP\SYS\profile\NSP_DVEBMGS00_mwsrvsap

pid        3112

Sun Sep 07 12:04:00 2014

kernel runs with dp version 133000(ext=118000) (@(#) DPLIB-INT-VERSION-133000-UC)

length of sys_adm_ext is 588 bytes

*** SWITCH TRC-HIDE on ***

***LOG Q00=> DpSapEnvInit, DPStart (00 3112) [dpxxdisp.c   1315]

  shared lib "dw_xml.dll" version 201 successfully loaded

  shared lib "dw_xtc.dll" version 201 successfully loaded

  shared lib "dw_stl.dll" version 201 successfully loaded

  shared lib "dw_gui.dll" version 201 successfully loaded

  shared lib "dw_mdm.dll" version 201 successfully loaded

  shared lib "dw_rndrt.dll" version 201 successfully loaded

  shared lib "dw_abp.dll" version 201 successfully loaded

  shared lib "dw_sym.dll" version 201 successfully loaded

  shared lib "dw_aci.dll" version 201 successfully loaded

rdisp/softcancel_sequence :  -> 0,5,-1

use internal message server connection to port 3900

rdisp/dynamic_wp_check : 1

rdisp/calculateLoadAverage : 1

Sun Sep 07 12:04:04 2014

*** WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds

***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c  6423]

MtxInit: 30000 0 0

DpSysAdmExtInit: ABAP is active

DpSysAdmExtInit: VMC (JAVA VM in WP) is not active

DpIPCInit2: write dp-profile-values into sys_adm_ext

DpIPCInit2: start server >mwsrvsap_NSP_00                         <

DpShMCreate: sizeof(wp_adm) 31696 (2264)

DpShMCreate: sizeof(tm_adm) 5517056 (27448)

DpShMCreate: sizeof(wp_ca_adm) 64000 (64)

DpShMCreate: sizeof(appc_ca_adm) 64000 (64)

DpCommTableSize: max/headSize/ftSize/tableSize=500/16/584064/584080

DpShMCreate: sizeof(comm_adm) 584080 (1144)

DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0

DpShMCreate: sizeof(slock_adm) 0 (296)

DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0

DpShMCreate: sizeof(file_adm) 0 (80)

DpShMCreate: sizeof(vmc_adm) 0 (2152)

DpShMCreate: sizeof(wall_adm) (41664/42896/64/192)

DpShMCreate: sizeof(gw_adm) 48

DpShMCreate: sizeof(j2ee_adm) 3952

DpShMCreate: SHM_DP_ADM_KEY (addr: 00000000079D0050, size: 6363600)

DpShMCreate: allocated sys_adm at 00000000079D0060

DpShMCreate: allocated wp_adm_list at 00000000079D3070

DpShMCreate: allocated wp_adm at 00000000079D3260

DpShMCreate: allocated tm_adm_list at 00000000079DAE40

DpShMCreate: allocated tm_adm at 00000000079DAE90

DpShMCreate: allocated wp_ca_adm at 0000000007F1DDA0

DpShMCreate: allocated appc_ca_adm at 0000000007F2D7B0

DpShMCreate: allocated comm_adm at 0000000007F3D1C0

DpShMCreate: system runs without slock table

DpShMCreate: system runs without file table

DpShMCreate: allocated vmc_adm_list at 0000000007FCBB60

DpShMCreate: system runs without vmc_adm

DpShMCreate: allocated gw_adm at 0000000007FCBC10

DpShMCreate: allocated j2ee_adm at 0000000007FCBC50

DpShMCreate: allocated ca_info at 0000000007FCCBD0

DpShMCreate: allocated wall_adm at 0000000007FCCC60

Sun Sep 07 12:04:05 2014

DpCommAttachTable: attached comm table (header=0000000007F3D1C0/ft=0000000007F3D1D0)

DpSysAdmIntInit: initialize sys_adm

rdisp/test_roll : roll strategy is DP_NORMAL_ROLL

dia token check not active (6 token)

MBUF state OFF

DpCommInitTable: init table for 500 entries

DpRqQInit: keep protect_queue / slots_per_queue 0 / 2001 in sys_adm

rdisp/queue_size_check_value :  -> on,50,30,40,500,50,500,80

EmInit: MmSetImplementation( 2 ).

MM global diagnostic options set: 0

<ES> client 0 initializing ....

<ES> EsILock: use spinlock for locking

<ES> InitFreeList

<ES> block size is 4096 kByte.

<ES> Info: em/initial_size_MB( 8195MB) not multiple of em/blocksize_KB( 4096KB)

<ES> Info: em/initial_size_MB rounded up to 8196MB

Using implementation view

<EsNT> Using memory model view.

<EsNT> Memory Reset disabled as NT default

<ES> 2048 blocks reserved for free list.

ES initialized.

mm.dump: set maximum dump mem to 96 MB

DpVmcSetActive: set vmc state DP_VMC_NOT_ACTIVE

MPI: dynamic quotas disabled.

MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%

rdisp/http_min_wait_dia_wp : 1 -> 1

***LOG CPS=> DpLoopInit, ICU ( 4.0.1 4.0.1 5.1) [dpxxdisp.c   1701]

***LOG Q0K=> DpMsAttach, mscon ( mwsrvsap) [dpxxdisp.c   12467]

MBUF state LOADING

DpStartStopMsg: send start message (myname is >mwsrvsap_NSP_00                         <)

DpStartStopMsg: start msg sent

CCMS uses Shared Memory Key 73 for monitoring.

CCMS: Initalized shared memory of size 60000000 for monitoring segment.

CCMS: Checking Downtime Configuration of Monitoring Segment.

CCMS: AlMsUpload called by wp 1024.

Sun Sep 07 12:04:06 2014

CCMS: AlMsUpload successful for C:\usr\sap\NSP\DVEBMGS00\log\ALMTTREE.DAT (657 MTEs).

CCMS: start to initalize 3.X shared alert area (first segment).

DpMBufHwIdSet: set Hardware-ID

***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1296]

MBUF state ACTIVE

DpWpBlksLow: max wp blocks in queue is 800 (80 %)

MBUF component UP

DpMsgProcess: 1 server in MBUF

DpAppcBlksLow: max appc blocks in queue is 500 (50 %)

DEV_W0:

---------------------------------------------------

trc file: "dev_w0", trc level: 1, release: "720"

---------------------------------------------------

*

*  ACTIVE TRACE LEVEL           1

*  ACTIVE TRACE COMPONENTS      all, MJ

*

M sysno      00

M sid        NSP

M systemid   562 (PC with Windows NT)

M relno      7200

M patchlevel 0

M patchno    201

M intno      20020600

M make       multithreaded, Unicode, 64 bit, optimized

M profile    \\mwsrvsap\sapmnt\NSP\SYS\profile\NSP_DVEBMGS00_mwsrvsap

M pid        3208

M

M  kernel runs with dp version 133000(ext=118000) (@(#) DPLIB-INT-VERSION-133000-UC)

M  length of sys_adm_ext is 588 bytes

M  ***LOG Q0Q=> tskh_init, WPStart (Workp. 0 3208) [dpxxdisp.c   1377]

I  MtxInit: 30000 0 0

M  DpSysAdmExtCreate: ABAP is active

M  DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active

M  DpIPCInit2: read dp-profile-values from sys_adm_ext

M  DpShMCreate: sizeof(wp_adm) 31696 (2264)

M  DpShMCreate: sizeof(tm_adm) 5517056 (27448)

M  DpShMCreate: sizeof(wp_ca_adm) 64000 (64)

M  DpShMCreate: sizeof(appc_ca_adm) 64000 (64)

M  DpCommTableSize: max/headSize/ftSize/tableSize=500/16/584064/584080

M  DpShMCreate: sizeof(comm_adm) 584080 (1144)

M  DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0

M  DpShMCreate: sizeof(slock_adm) 0 (296)

M  DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0

M  DpShMCreate: sizeof(file_adm) 0 (80)

M  DpShMCreate: sizeof(vmc_adm) 0 (2152)

M  DpShMCreate: sizeof(wall_adm) (41664/42896/64/192)

M  DpShMCreate: sizeof(gw_adm) 48

M  DpShMCreate: sizeof(j2ee_adm) 3952

M  DpShMCreate: SHM_DP_ADM_KEY (addr: 00000000100C0050, size: 6363600)

M  DpShMCreate: allocated sys_adm at 00000000100C0060

M  DpShMCreate: allocated wp_adm_list at 00000000100C3070

M  DpShMCreate: allocated wp_adm at 00000000100C3260

M  DpShMCreate: allocated tm_adm_list at 00000000100CAE40

M  DpShMCreate: allocated tm_adm at 00000000100CAE90

M  DpShMCreate: allocated wp_ca_adm at 000000001060DDA0

M  DpShMCreate: allocated appc_ca_adm at 000000001061D7B0

M  DpShMCreate: allocated comm_adm at 000000001062D1C0

M  DpShMCreate: system runs without slock table

M  DpShMCreate: system runs without file table

M  DpShMCreate: allocated vmc_adm_list at 00000000106BBB60

M  DpShMCreate: system runs without vmc_adm

M  DpShMCreate: allocated gw_adm at 00000000106BBC10

M  DpShMCreate: allocated j2ee_adm at 00000000106BBC50

M  DpShMCreate: allocated ca_info at 00000000106BCBD0

M  DpShMCreate: allocated wall_adm at 00000000106BCC60

M  DpCommAttachTable: attached comm table (header=000000001062D1C0/ft=000000001062D1D0)

M  DpRqQInit: use protect_queue / slots_per_queue 0 / 2001 from sys_adm

M

M Sun Sep 07 12:04:06 2014

M  rdisp/queue_size_check_value :  -> on,50,30,40,500,50,500,80

X  EmInit: MmSetImplementation( 2 ).

X  MM global diagnostic options set: 0

X  <ES> client 0 initializing ....

X  <ES> EsILock: use spinlock for locking

X  Using implementation view

X  <EsNT> Using memory model view.

M  <EsNT> Memory Reset disabled as NT default

X  ES initialized.

X  mm.dump: set maximum dump mem to 96 MB

M  DpVmcSetActive: set vmc state DP_VMC_NOT_ACTIVE

M  ThStart: taskhandler started

M  ThInit: initializing DIA work process W0

M

M Sun Sep 07 12:04:08 2014

M  ThInit: running on host mwsrvsap

M

M Sun Sep 07 12:04:10 2014

M  calling db_connect ...

B  Loading DB library 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' ...

B  Library 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' loaded

B  Version of 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' is "720.00", patchlevel (0.201)

C

C  DBSDBSLIB : version 720.00, patch 0.201 (Make PL 0.201)

C  MAXDB shared library (dbsdbslib) patchlevels (last 10)

C    (0.201) Take care of warnings during database connect (note 1600066)

C    (0.117) Define a primary key on the temp tables for R3szchk (note 1606260)

C    (0.114) Support of MaxDB 7.8 and 7.9 (note 1653058)

C    (0.103) Close all lob locators at end of the transaction (note 1626591)

C    (0.101) Fix for unknown table __TABLE_SIZES_ (R3szchk) (note 1619504)

C    (0.098) Use filesystem counter for R3szchk (note 1606260)

C    (0.092) Secondary connection to HANA (note 1481256)

C    (0.089) UPDSTAT with SAPSYSTEMNAME longer as 3 characters (note 1584921)

C    (0.081) No UPSERT on WBCROSSGT (note 1521468)

C    (0.080) New feature batch streaming (note 1340617)

C

C

C  Loading SQLDBC client runtime ...

C  SQLDBC Module  : C:\sapdb\clients\NSP\pgm\libSQLDBC77.dll

C  SQLDBC SDK     : SQLDBC.H  7.9.7    BUILD 010-123-243-190

C  SQLDBC Runtime : libSQLDBC 7.9.7    BUILD 010-123-243-190

C  SQLDBC client runtime is MaxDB 7.9.7.010 CL 243190

C  SQLDBC supports new DECIMAL interface : 1

C  SQLDBC supports VARIABLE INPUT data   : 1

C  SQLDBC supports VARIABLE OUTPUT data  : 1

C  SQLDBC supports Multiple Streams      : 1

C  SQLDBC supports LOB LOCATOR KEEPALIVE : 1

C  SQLDBC supports LOB LOCATOR COPY      : 1

C  SQLDBC supports BULK SELECT with LOBS : 1

C  SQLDBC supports BATCH STREAM          : 1

C  INFO : SQLOPT= -I 0 -t 0 -S SAPR3

C  Try to connect (DEFAULT) on connection 0 ...

C  Attach to SAP DB : Kernel    7.9.07   Build 010-123-243-190

C  Database release is SAP DB 7.9.07.010

C  INFO : Database 'NSP' instance is running on 'mwsrvsap'

C  DB supports UPSERT SQL syntax : 1

C  DB supports new EXPAND syntax : 1

C  DB supports LOB locators      : 1

C  DB uses MVCC support          : 0

C  DB max. input host variables  : 2000

C  DB max. statement length      : 65535

C  UPSERT is disabled for : WBCROSSGT

C  INFO : SAP DB Packet_Size = 131072

C  INFO : SAP DB Min_Reply_Size = 4096

C  INFO : SAP DB Comm_Size = 126976

C  INFO : DBSL buffer size = 126976

C  INFO : SAP DB MaxLocks = 300000

C  INFO : Connect to DB as 'SAPNSP'

C  Command info enabled

C  Now I'm connected to MaxDB

C  00: mwsrvsap-NSP, since=20140907120410, ABAP= <unknown> (0)

B  Connection 0 opened (DBSL handle 0)

C  INFO : SAP RELEASE (DB) = 731

M  ThInit: db_connect o.k.

M

M Sun Sep 07 12:04:11 2014

M  ICT: exclude compression: *.zip,*.rar,*.arj,*.z,*.gz,*.tar,*.lzh,*.cab,*.hqx,*.ace,*.jar,*.ear,*.war,*.css,*.pdf,*.gzip,*.uue,*.bz2,*.iso,*.sda,*.sar,*.gif,*.png,*.swc,*.swf

DEV_MS:

---------------------------------------------------

trc file: "dev_ms", trc level: 1, release: "720"

---------------------------------------------------

[Thr 3092] Sun Sep 07 12:03:56 2014

[Thr 3092] ms/http_max_clients = 500 -> 500

[Thr 3092] MsSSetTrcLog: trc logging active, max size = 52428800 bytes

systemid   562 (PC with Windows NT)

relno      7200

patchlevel 0

patchno    101

intno      20020600

make       multithreaded, Unicode, 64 bit, optimized

pid        3088

[Thr 3092] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 3088) [msxxserv.c   2278]

[Thr 3092] load acl file = C:\usr\sap\NSP\SYS\global\ms_acl_info.DAT

[Thr 3092] MsGetOwnIpAddr: my host addresses are :

[Thr 3092]   1 : [10.0.0.225] mwsrvsap.local (HOSTNAME)

[Thr 3092]   2 : [127.0.0.1] mwsrvsap (LOCALHOST)

[Thr 3092]   3 : [10.10.0.10] mwsrvsap (NILIST)

[Thr 3092] MsHttpInit: full qualified hostname = mwsrvsap

[Thr 3092] HTTP logging is switch off

[Thr 3092] set HTTP state to LISTEN

[Thr 3092] *** HTTP port 8100 state LISTEN ***

[Thr 3092] *** I listen to internal port 3900 (3900) ***

[Thr 3092] *** HTTP port 8100 state LISTEN ***

[Thr 3092] CUSTOMER KEY: >V1901974459<

[Thr 3092] build version=720.2011.10.26

2.) So I installed the SAP MaxDB Database Manager in order to check the logs and do an archiving. But here seems to be the issue - I can not see the NSP Database instance (see attached screenshot). But how can this be? The log file say that the db connection is ok?

3.) What is really strange to me is the Syslog in the management console --> see log3.png. Why does it say work process in reconnect status?

Does anybody have an idea how to solve this issue? Help is really appreciated and points will be rewarded.

Best regards

Maik

Hi Experts,

we have a requirement to enable the hindi language in enterprise portal & R/3. Portal configured as a hub system and aslo communicating backend with R/3 system. As per the recommendations for supporting hindi in R/3, we have upgraded R/3 from EHP4 to EHP6 SP09. We have enabled Hindi language in R/3 system. Similarly portal system also, we have upgraded  from 7.0 SP24 to 7.3 EHP1 SP11.

We are not sure Netweaver 7.3EHP1 SP11 will support Hindi for enabling in netweaver system?. Else need to upgrade any other SP level?. Waiting for your valuable solutions.

Regards,

Kubendran

Hi Friends

Could you please guide me how to check /access Business content queries for SAP  BW - EHSM (  Environment, Health and Safety )  Module

Thanks

Sree

Hello all,

i am using SAP Netweaver Application Server Java 7.40. Could someone tell me, where is the Java library folder for all the deployed applications? thx.

best regards,

Fanglin

SAP Middleware news – the newest addition to the SCN newsletters' family We invite you to subscribe for the brand new SAP Middleware news @ SCN monthly. You can load the simple reg form using your existing SAP login if you wish. Read more in this blog by Mariana Mihaylova and subscribe today to get your April news shortly. April 2014

The New SCN Category SAP Kernel This SCN category is dedicated to information about SAP Kernel as the basis for the SAP NetWeaver Application Server ABAP. Check it out to share your experience or follow the news regarding SAP Kernel development, release and maintenance strategy and SP stack kernel delivery. April 2014

SAP NetWeaver 7.4 SP 5 SAP NetWeaver 7.4 is the foundation and integration platform for the SAP Business Suite. SAP NetWeaver 7.4 is heavily optimized for SAP HANA. With SP5 all usage types are fully supported without restriction. Presentation by Karl Kessler. Additional information is available in SAP NetWeaver 7.4 - Optimized for SAP HANA, Cloud and Mobile by Monika Kaiser. March 2014

IFG Survey: Central PI Monitoring with SAP Solution Manager Monitoring is a key challenge according to the global 2013 PI survey. To gain a better understanding of the situation and requirements, the IFG for PI and SAP have launched a follow-up survey with focus on central PI monitoring with SAP Solution Manager. Read all details in Holger Himmelmann’s blog and feel free to participate and share with others. Jan 2014

SCN's most interesting blogs for SAP Architects As we all know SCN now has a Category for NetWeaver Architecture, a container for everything NetWeaver Architecture related. Searching around 2000 Blogs, Andy Silvey picked a list of 36 blogs that are most important for SAP Architects. This blog will become a monthly delivery, of a selection of the previous months most interesting SCN blogs for SAP Architects. Nov 2013

How to communicate Architecture – Technical Architecture Modeling at SAP This blog post from Pietro Menna continues the previous posts from Bernhard Groene in part1 and part2, giving an overview and introduction to TAM block diagrams. This article gives details about how to describe behavior using TAM. Nov 2013

The New SCN SAP NetWeaver Architecture Category - An Introduction Andy Silvey has fulfilled one of his small personal goals and contributed to the realization of a new Category on the SCN, for everything NetWeaver Architecture and concerning SAP NetWeaver Architects. The new Category can be found here, SAP NetWeaver Architecture Category On the SAP SCN. Oct 2013

body>