Hi All,

       I have been asked to do the implantation of SAP WEB DISPATCHER for the integration ot SAP CFTE and ERP system at a client site.

I have done the installation of the dispatcher on a windows system in DMZ. Please share me the steps to be followed for the configuration of SSL connectivity to be established from CFTE to ERP and from ERP to CFTE through proxy.

Regards

Sandy

Hi , 

We have an requirement to get the list of users who logged in with the Last Logon Information  .

From Standard Portal activity report ...we can get only the First logon date of the users .

Kindly let us know the other possibilities to get it .

Thanks ,

Keerthi

I have problem with UD Connect, it appears a message

UDCADAPTERROR::RSSDK|100|Cannot open the connectio

when I try to open the list of Source Obj UD Connect in the Data Source

Does anyone knows about this issue?

Thansk!

what's the difference between transport route and transport layer,Can somebody give me some explaination? thks in advance!

Hi,

     Can somebody help me to get the features of ECC 6.0 EHP7?

Regards,

Sandy Sam

Hi,

I am a SDN subscriber and successfully installed SAP Netweaver 7.0 SR3 on Solaris 10/08 oracle 10.2.0.4 database.

Got the new license key file (Digitally-Signed License Key) and successfully installed with user sap*.

But when I logon with newly created user it gives an error "Logon not possible (Error in license check)"

I tried following but did not work out.

-- Reinstall license key twice and show license installed successfully.

-- Cannot install license from command prompt (saplicense -install -ifile=filename.txt) it gives an error "license key file is digital" try installing by login to system".

-- Tried to recreate another user same problem.

-- was able to logon with temp license but once temp license deleted cannot logon with new permenent license.

-- only one user sap* can logon.

-- SLICENSE shows license in database with staus "Green"

-- Harware key, installation number verified. seems ok.

-- When I am trying to install temp license it gives an error message " There is a permenent license key for "NetWeaver_ORA" in the system but it has never been checked successfully.In this situation a temporary license key must not be installed.

If anyone had similer problem and found the solution please post it. would be appreciated for the solution.

Thanks

Atul

Hello,

I have a PI 7.3 SP7 System running with Oracle on RHEL5. I need to install the latest SPS and therefore I have to do a

OS-Migration to RHEL6, because of a new glibc version used in the SAP-Kernel.

All I ever knew or heard of OS-Migrations was "Use sapinst, do system-copy, easy....as click - click"

Then I found the "System Copy Guide Document version: 1.6 – 2014-07-07 for PI 7.1 to 7.4"

https://websmp101.sap-ag.de/~sapidb/011000358700001324472012E

And now, things doesn' look easy anymore....

First question: Is this the right Guide for my system environment ?

Second question : Is there an "easy" Guide or a howto ?

In my opinion I'm faster if I do a clean fresh install....instead of a system-copy...

regards,

Dirk

In my code I have the return code  7 and message "Error opening an RFC Connection" when the function module AC_FLUSH_CALL is called.

Where can I start to find the error.

Thanks.

Hello,

i have tried to find documentation about DTR with NWDS. But i could not find anyone. I have problem. In DTR there is source. I want to check out the source and create a project. Could someone tell me how? thx.

Hi

plz provide answer for this quetion

what is the meaning of status in Message Monitoring

Hi

what are the parsing types in XSLT mapping

Hi,

On our BI Production server, in job overview there are 5 of these jobs running for almost a day now and they are taking all job spaces so no other process cant be completed. Our BC guy is on vacation so there is no one I can actually ask what to do, so please advise. Thanks

The below is the background and analysis detail regarding this performance issue.

SB1 Unicode Conversion will be done by SAP tools R3load, which means using R3load to export the whole database to filesystem and import them into new SB1 at la later time.

Currently, R3load-Export has run for the long time and not finished yet.

In SB1 database, there’s a table /BIC/B0000452000 with around 550GB which is a one of the lastest table. So performance optimization on this table must be taken to speed up the R3load process.

Here’s the steps I have taken on optimization for this table.

• Using R3load to split this table into 550 packages(1 GB for each package) which is standard optimization method. And then set number of parallel processes to 30 which means 30 R3load processes are running in parallel and each process for each package.

arlssap03:sb1adm 638> ps -ef|grep R3load

  sb1adm  7078032 24182820   0 02:55:56  pts/4  0:42 /sapmnt/SB1/exe/R3load -e _BIC_B0000452000-109.cmd -datacodepage 4102 -l _BIC_B0000452000-109.log -stop_on_error

  sb1adm  7274566 24182820  14 02:55:54  pts/4  0:42 /sapmnt/SB1/exe/R3load -e _BIC_B0000452000-105.cmd -datacodepage 4102 -l _BIC_B0000452000-105.log -stop_on_error

  sb1adm 11010136 24182820   0 02:55:55  pts/4  0:42 /sapmnt/SB1/exe/R3load -e _BIC_B0000452000-112.cmd -datacodepage 4102 -l _BIC_B0000452000-112.log -stop_on_error

  sb1adm 11469032 24182820   0 04:56:21  pts/4  0:35 /sapmnt/SB1/exe/R3load -e _BIC_B0000452000-120.cmd -datacodepage 4102 -l _BIC_B0000452000-120.log -stop_on_error

  sb1adm 11927680 24182820   3 02:55:52  pts/4  0:43 /sapmnt/SB1/exe/R3load -e _BIC_B0000452000-93.cmd -datacodepage 4102 -l _BIC_B0000452000-93.log -stop_on_error

  sb1adm 12124170 24182820   2 02:55:50  pts/4  0:41 /sapmnt/SB1/exe/R3load -e _BIC_B0000452000-92.cmd -datacodepage 4102 -l _BIC_B0000452000-92.log -stop_on_error

  sb1adm 13238434 24182820   0 02:55:56  pts/4  0:42 /sapmnt/SB1/exe/R3load -e _BIC_B0000452000-114.cmd -datacodepage 4102 -l _BIC_B0000452000-114.log -stop_on_error

  sb1adm 14352578 24182820   1 02:55:54  pts/4  0:42 /sapmnt/SB1/exe/R3load -e _BIC_B0000452000-106.cmd -datacodepage 4102 -l _BIC_B0000452000-106.log -stop_on_error

  sb1adm 14614768 24182820   0 02:55:54  pts/4  0:43 /sapmnt/SB1/exe/R3load -e _BIC_B0000452000-97.cmd -datacodepage 4102 -l _BIC_B0000452000-97.log -stop_on_error

  sb1adm 15204588 24182820   0 02:55:56  pts/4  0:42 /sapmnt/SB1/exe/R3load -e _BIC_B0000452000-111.cmd -datacodepage 4102 -l _BIC_B0000452000-111.log -stop_on_error

  sb1adm 16187644 24182820   0 02:55:55  pts/4  0:42 /sapmnt/SB1/exe/R3load -e _BIC_B0000452000-116.cmd -datacodepage 4102 -l _BIC_B0000452000-116.log -stop_on_error

  sb1adm 16973862 24182820   3 02:55:54  pts/4  0:43 /sapmnt/SB1/exe/R3load -e _BIC_B0000452000-100.cmd -datacodepage 4102 -l _BIC_B0000452000-100.log -stop_on_error

  sb1adm 17432622 24182820  13 02:55:56  pts/4  0:43 /sapmnt/SB1/exe/R3load -e _BIC_B0000452000-115.cmd -datacodepage 4102 -l _BIC_B0000452000-115.log -stop_on_error

  sb1adm 17694774 24182820   0 02:55:54  pts/4  0:43 /sapmnt/SB1/exe/R3load -e _BIC_B0000452000-95.cmd -datacodepage 4102 -l _BIC_B0000452000-95.log -stop_on_error

  sb1adm 18219062 24182820   0 02:55:56  pts/4  0:42 /sapmnt/SB1/exe/R3load -e _BIC_B0000452000-118.cmd -datacodepage 4102 -l _BIC_B0000452000-118.log -stop_on_error

  sb1adm 18284732 24182820   7 02:55:54  pts/4  0:43 /sapmnt/SB1/exe/R3load -e _BIC_B0000452000-102.cmd -datacodepage 4102 -l _BIC_B0000452000-102.log -stop_on_error

  sb1adm 18350136 24182820   0 02:55:55  pts/4  0:42 /sapmnt/SB1/exe/R3load -e _BIC_B0000452000-113.cmd -datacodepage 4102 -l _BIC_B0000452000-113.log -stop_on_error

  sb1adm 18546756 24182820  27 02:55:54  pts/4  0:42 /sapmnt/SB1/exe/R3load -e _BIC_B0000452000-107.cmd -datacodepage 4102 -l _BIC_B0000452000-107.log -stop_on_error

  sb1adm 19857532 24182820   3 02:55:54  pts/4  0:43 /sapmnt/SB1/exe/R3load -e _BIC_B0000452000-98.cmd -datacodepage 4102 -l _BIC_B0000452000-98.log -stop_on_error

  sb1adm 19988616 24182820   7 02:55:54  pts/4  0:43 /sapmnt/SB1/exe/R3load -e _BIC_B0000452000-99.cmd -datacodepage 4102 -l _BIC_B0000452000-99.log -stop_on_error

  sb1adm 20709510 24182820   3 02:55:54  pts/4  0:43 /sapmnt/SB1/exe/R3load -e _BIC_B0000452000-96.cmd -datacodepage 4102 -l _BIC_B0000452000-96.log -stop_on_error

  sb1adm 21168272 24182820   0 02:55:56  pts/4  0:43 /sapmnt/SB1/exe/R3load -e _BIC_B0000452000-110.cmd -datacodepage 4102 -l _BIC_B0000452000-110.log -stop_on_error

  sb1adm 22675464 24182820   0 02:55:56  pts/4  0:42 /sapmnt/SB1/exe/R3load -e _BIC_B0000452000-119.cmd -datacodepage 4102 -l _BIC_B0000452000-119.log -stop_on_error

  sb1adm 23658742 24182820   0 02:55:56  pts/4  0:42 /sapmnt/SB1/exe/R3load -e _BIC_B0000452000-108.cmd -datacodepage 4102 -l _BIC_B0000452000-108.log -stop_on_error

  sb1adm 23724272 24182820   6 02:55:54  pts/4  0:43 /sapmnt/SB1/exe/R3load -e _BIC_B0000452000-103.cmd -datacodepage 4102 -l _BIC_B0000452000-103.log -stop_on_error

  sb1adm 23789806 24182820   2 02:55:50  pts/4  0:43 /sapmnt/SB1/exe/R3load -e _BIC_B0000452000-91.cmd -datacodepage 4102 -l _BIC_B0000452000-91.log -stop_on_error

  sb1adm 24379406 24182820  14 02:55:56  pts/4  0:43 /sapmnt/SB1/exe/R3load -e _BIC_B0000452000-104.cmd -datacodepage 4102 -l _BIC_B0000452000-104.log -stop_on_error

  sb1adm 24444938 24182820   0 02:55:54  pts/4  0:42 /sapmnt/SB1/exe/R3load -e _BIC_B0000452000-117.cmd -datacodepage 4102 -l _BIC_B0000452000-117.log -stop_on_error

  sb1adm 24510472 24182820   3 02:55:53  pts/4  0:42 /sapmnt/SB1/exe/R3load -e _BIC_B0000452000-94.cmd -datacodepage 4102 -l _BIC_B0000452000-94.log -stop_on_error

  sb1adm 24576188 24182820   7 02:55:54  pts/4  0:43 /sapmnt/SB1/exe/R3load -e _BIC_B0000452000-101.cmd -datacodepage 4102 -l _BIC_B0000452000-101.log -stop_

• Due to the table /BIC/B0000452000 was split into many packages according to WHERE condition with column "RECORD", so one index must be created on this column to improve performance for SELECT statement. You can see below, the index is being used and worked correctly.

db2 => select indname,colnames from syscat.indexes where tabname='/BIC/B0000452000'

INDNAME                                                                                                                          COLNAMES                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              
-------------------------------------------------------------------------------------------------------------------------------- ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
/BIC/B0000452000~0                                                                                                               +REQUEST+DATAPAKID+RECORD                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                             
/BIC/B0000452000~IMG                                                                                                             +RECORD                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  2 record(s) selected.

db2 =>

• db2expln -database SB1 -f SQLStatement2.sql –terminal

Statement:

  SELECT "REQUEST" , "DATAPAKID" , "RECORD" , "INSP_LOT" , "INSP_CHAR"
          , "COUNTRY" , "/BIC/FARM" , "/BIC/SETTLE_DT" , "/BIC/AFL_DT"
          , "INSPTYPE" , "MASTERCHAR" , "/BIC/ZDAYDIFF" ,
          "/BIC/ROUTENR" , "/BIC/MODT_DT" , "/BIC/ZMODTDIFF"
  FROM SAPPB1."/BIC/B0000452000"
  WHERE ("RECORD" > 911)AND ("RECORD" <=921)

Section Code Page = 819

Estimated Cost = 94919512.000000
Estimated Cardinality = 6232849.000000

Access Table Name = SAPPB1./BIC/B0000452000  ID = 15,560
|  Index Scan:  Name = SAPPB1./BIC/B0000452000~IMG  ID = 2
|  |  Regular Index (Not Clustered)
|  |  Index Columns:
|  |  |  1: RECORD (Ascending)
|  #Columns = 15
|  Skip Inserted Rows
|  Skip Deleted Rows
|  Avoid Locking Committed Data
|  Evaluate Predicates Before Locking for Key
|  #Key Columns = 1
|  |  Start Key: Exclusive Value
|  |  |  |  1: 911
|  |  Stop Key: Inclusive Value
|  |  |  |  1: 921
|  Data Prefetch: Eligible 3795676
|  Index Prefetch: Eligible 3795676
|  Lock Intents
|  |  Table: Intent Share
|  |  Row  : Next Key Share
|  Sargable Predicate(s)
|  |  Return Data to Application
|  |  |  #Columns = 15
Return Data Completion

After above optimization, I am sure the R3load should be benefit of it just like what I did before. But it is not the case, below is the analysis result.

I run the command 　"db2 get snapshot for application agentid 5079 | grep -i rows" (only for 1 package) one time each second to observe the result

db2 get snapshot for application agentid 5079 | grep -i rows

Internal rows deleted                      = 0

Internal rows inserted                     = 0

Internal rows updated                      = 0

Rows deleted                               = 0

Rows inserted                              = 0

Rows updated                               = 0

Rows selected                              = 5347717

Rows read                                  = 5347710

Rows written                               = 0

Rows read                                  = 5298960

Rows written                               = 0

Rows deleted                               = 0

Rows updated                               = 0

Rows inserted                              = 0

Rows fetched                               = 5298827

arlssap03:sb1adm 303> db2 get snapshot for application agentid 5079 | grep -i rows

Internal rows deleted                      = 0

Internal rows inserted                     = 0

Internal rows updated                      = 0

Rows deleted                               = 0

Rows inserted                              = 0

Rows updated                               = 0

Rows selected                              = 5348176

Rows read                                  = 5348169

Rows written                               = 0

Rows read                                  = 5299419

Rows written                               = 0

Rows deleted                               = 0

Rows updated                               = 0

Rows inserted                              = 0

Rows fetched                               = 5299321

arlssap03:sb1adm 304> db2 get snapshot for application agentid 5079 | grep -i rows

Internal rows deleted                      = 0

Internal rows inserted                     = 0

Internal rows updated                      = 0

Rows deleted                               = 0

Rows inserted                              = 0

Rows updated                               = 0

Rows selected                              = 5348479

Rows read                                  = 5348472

Rows written                               = 0

Rows read                                  = 5299722

Rows written                               = 0

Rows deleted                               = 0

Rows updated                               = 0

Rows inserted                              = 0

Rows fetched                               = 5299321

As you can see, the line "Rows selected" changed only a few hundreds each time which is too slow. For other tables, when I do this test, it is by tens of thousands of each!

Please have a look, if some optimization can be done on DB2 level and let me know if you have any question.

Br, Kevin

Hi Guys,

I have a requirement in my project in which PI should trigger alert which will go to concerned persons and the message should also fail in PI.

I know the code to trigger alert using UDF but dont know how to make the message to fail in PI.

Please share your thoughts or links with me. Your help will be highly appreciated.

Thanks,

Shankul Saxena

Hi all,

I would like to get idea regarding rerunning SGEN in our CRM system. We upgraded our pre-production system, and run SGEN after the upgrade. Run completed, however, runs for about 83 hours.

We will run the same upgrade in our production CRM next month. The 83 hours runtime translates to about 3.5 days the SGEN is running. Meaning 3.5 days users will encounter their transactions will load in the first instance they executes it. Non technical users will see it as system performance, and could cause so much noise in the business.

We are looking at rerunning SGEN on the system to see if this time, the runtime will be faster, so that we can get a much shorter benchmark.

If we do such, can anybody suggest how can we ensure that it will really repeat the regeneration of loads?

Also, can anyone suggest further optimization activity when running SGEN?

We would appreciate your response for inputs. Thanks.

Regards,

Philip

Is there any way to build a query using BEx query designer to count the number of unique values of a characteristic.  For instance, my cube has detailed transactions for claim information.  Each claim number can have multiple products.  My query need to show the number of claims that exist for each product.  I don't want the detail of the claim number, just how many claims exist.

Product          Gross Paid Loss        Claim Count

Total Auto                $ 43,865.01              ?

Total Property  $ 4,068,321.57              ?

Not assigned                19,426

While performing a system refresh by command  brrestore -m full -b beieghis.aft -c

error message is coming as::

BR0360E Not enough disk space in /oracle/SBX/sapdata2 for restore, missing at least 95345.757 MB.

----------------------

Source system(Production)

Target System

-------------------------------------------

In my Source system(Production) for /oracle/EPE/sapdata2 used space is only 97 GB and

In my target system /oracle/SBX/sapdata2 allocated space is 132 GB  then why it is asking for 95345.757 MB?

WHY Target  /oracle/SBX/sapdata2 is showing more files than the present in source /oracle/EPE/sapdata2 while all the files had been removed before

running the command brrestore -m full -b beieghis.aft -c  ?

Hi,

I'm a Virtualization expert @SAP IT. I was aked to provide a solution for hostname change process for cloned virtual machines. Here, i'm posting my solution but use it on your own risk and sideeffects can appear too (applicable to NW 2004s - don't know about side effects till now).

1. Change your hostname to a new one  (newsid for clonned) and stop SAP services with prefix SAPXYZ_AB

2. open the c:\Windows\System32\drivers\etc\hosts file and add your previous hostname at the end of 127.0.0.1 line:

    127.0.0.1       localhost      youroldhostname

3. Use sql enterprise manager (or other SQL tool) in order to connect NW's database.

4. NW's database is a database with a SAP systemID - XYZ and locate J2EE_CONFIGENTRY table

5. Open a query window and check the following SQL Query for previous appearances of your hostname

SELECT     *

FROM        J2EE_CONFIGENTRY

WHERE     (UPPER(VSTR) = 'YOUROLDHOSTNAME-WITH-CAPITAL-LETTERS')

6. If this query returns results - run the following SQL update command

UPDATE    J2EE_CONFIGENTRY

SET              VSTR = 'NEWHOSTNAME'

WHERE     (UPPER(VSTR) = 'YOUROLDHOSTNAME-WITH-CAPITAL-LETTERS')

7. if step 5 failed try to run query w/oout where statement

Best regards,

Boris Mikhailovski

System & Software engineer

Message was edited by:

        Boris Mikhailovski

Hi All,

We are upgrading our pre-production PI system. This also serves rehearsal upgrade that we will also perform for the production system.

During Configuration roadmap steps, the SUM process stopped due to error occurred during the execution of the "Show validation result" step... message below.

Jul 28, 2014 10:00:19 PM [Error ]: The following problem has occurred during step execution: com.sap.sdt.util.diag.DiagException: Validation of deployment queue completed with error: The stack does not match the system. Probably the system was

changed after the stack was generated. Synchronize the system with SAP Solution Manager and then generate a new stack.

Software component seeburger.com/AS2Adapter is found on the system but not in the list of expected system components in the stack.

The stack xml file we are using during this upgrade is a converted copy of the stack xml generated during the upgrade of dev system. This same stack xml file was working when we applied the update in QAS. We used the report RPT_MOPZ_COPY_STACK_XML to convert the stack xml file.

May we ask if there is a way to exclude the component mentioned in the message so that we can still use the stack xml file, thus, we can ensure that the systems are aligned in terms of the version of the components.

We would appreciate your response for inputs. Thanks.

Regards,

Philip